We have the main wall of cabinetry installed. We got the upper cabinets installed a few days ago, and completed the lowers this weekend.
Here are the uppers:
And completed with lowers starting in the corner:
The kitchen floor is out of level by almost 1 1/2" across the cabinet run. Because of this, it would be nearly impossible to shim them up 1 1/2" on the low end to make them level. Instead, we measured and cut the base of each cabinet to lower the high ones down almost 1 1/2". This took a lot off the bottom of some on the right side above:
The end result is that the cabinets are nearly perfectly level, give or take 1/16" of an inch. When countertops are ordered, they should be an easy install.
No comments:
Post a Comment