Sunday funday

We got most of drywall on first wall sanded, prepped and primed.


Most of wall primed - needed to cover the dark stain on lower wall as well.

Took advantage of some warmer weather to strip more shingles on back side wall of sunporch.


Last section with shingles to remove.


A little pre-rain fire.



Drywall

Maybe we've shared how much I enjoy drywall (I don't).  It's not terribly hard, but it requires a deft hand and technique that escapes me.  But it's a means to an end, so here we are.

The drywall in most of the room is in good shape, but the previous owner chose to use a textured finish, which we hate.  It's pretty hard to remove all of the texture (short of replacing all drywall) so the approach is to sand it and remove as much of high spots, and then go with a light skim coat of drywall mud over entire wall to fill in the low spots. A light sanding at end and it's pretty smooth.

The walls were a beige, so the white lines are from sanding high spots down:


Another view of sanded drywall:


After applying thin coat of mud (and no paint) wall almost looks like new drywall. It still needs a final light sanding.

And new drywall for slider wall:


Here's a better look at drywall sanding:



Sunporch windows

Spent time going back to my experience from over a year ago when we replaced 24+ windows. The first two windows are in sunporch, so now we build window jambs to fit.

My supervisor arrived on time.


Cutting jambs and filling holes and damage from prying off wall (all is reclaimed from trim we removed in this room).


Sanding jambs with my homemade downdraft sanding box.


Priming jambs before assembly.

And windowsills.


And jambs installed:





Sunporch progress

 Got a few loose ends tied up - finished Catherine's door before she returns for Turkey Break.


Started shingling the sunporch


Got some decent progress, but cold weather slowed things down.


Lots more shingle prep (gluing) in basement for trim under windows.


The previous owner had the drywall textured using drywall mud, which we dislike immensely.  S o started sanding to flatten things out.  It won't be perfect, but we can make things a lot smoother than they were.


Installed blocking for window jambs which are being assembled in basement (not pictured).



Slow sunporch progress

The weather wasn't super cooperative, and I was feeling lazy, so we didn't get a lot done this weekend.

Earlier in the week (wednesday?) we got one of the doors installed.


It actually went in fairly easily.


Temps are going to be colder next week so we needed to get trim and insulation for door and windows done while the weekend offered warmer-than-usual weather.

Assembled door trim in basement:


And voila trim installed (As well as spray foam insulation for cracks).


Spray foamed the windows and sliding door, let it set and trimmed excess (not pictured). And took time to cleanup the mess of tools and broken trim so we can work on window trim soon.




Moving backwards

 

Still work to be finished, but got the scaffolding removed. Some paint and trim on the portico and we'll be in a better place.


So we moved back to the sunporch. Here's the current state:


First removed all shingles.


And then the casement windows.

Goodbye old windows.


Hello Tyvek.


And some new windows with trim.



Garage, other side, part deux

We don't have a ton of pictures even though good progress was made.   Short story: we finished all the termite damage replacement, simil...