New sliding door not so awesome.

This past week, we were able to get the sliding door installed along with the two sliding (moving) panels, but didn't complete everything (hardward, locks, etc) because there's a slew of other items we need to complete.

When looking at the door in the closed position something didn't look right to me today.  And I was right.


When both doors are closed, they actually don't meet in the middle - they remain about 1" apart and there's a piece called "astrigal" that fills the gap - but we hadn't installed that piece yet. 

When looking at the door, the gap between the left and right sliding panels didn't seem consistent - it was warped or bowed - wider in the middle than at top/bottom.  

This is the left door panel with a level applied - it's perfectly straight - there's no gap between level and door.


However, the same cannot be said for the right door - see the gap between the level and door? That's because the right door panel has a curve in it and is almost 3/8" narrower in middle than at top/bottom.  Tools don't lie.

When closed, the gap at top of doors is 1 1/16"


But without moving the doors at all, the gap in the middle is 1 7/16" - almost 3/8" wider due to bow in right door.

I sent all of the above to Lowe's and they, in turn sent it directly to door manufacturer. I got a call back from the door manufacturer in under 30 minutes where they acknowledged the issue and immediately ordered me a new right panel - no questions.

(Side note: the door representative acknowledged why this happens and that indeed it's not supposed to.  Clearly this isn't the first time he's dealt with this problem - he explained to me exactly how it happens.)



No comments:

Post a Comment

Garage, other side, part deux

We don't have a ton of pictures even though good progress was made.   Short story: we finished all the termite damage replacement, simil...