Shed Work

I haven't posted in awhile due to lots of things, but figured activity as of late would be worthy of posting.

We have an old shed that's been on the property since we purchased the house.  It's not in the best of shape, but it's not horrible.  And we decided we actually could use it for some storage needs so we're giving it a quick spruce up (not a complete makeover) for now.


Those shingles need to be replaced due to moss. But that's a longer term project...


So we start real work by jacking up the shed, one side at a time.


Place new cinderblocks under rear corners to lift base out of the dirt.


Then we raise the front (and center, not prictured) until the shed is level.  Of course the old base supports had sunk and we no longer level.  We raised them up and then cut shims out of pressure treated wood to fill in the gap.

Why shim them? Why don't we just dig and re-level them?  Well, we can only lift the shed about 8" given the size and weight.  As such we cannot fully access the blocks in the center of the shed which means digging is not possible.  So if we can't dig and level all of them, we have to work from their current state, and some just happen to not be level.
 

But in the end, the shed is nearly perfect level.

Now we slowly start to strip those mossy shingles. Start with first layer and work our way down... 



No comments:

Post a Comment

Garage, other side, part deux

We don't have a ton of pictures even though good progress was made.   Short story: we finished all the termite damage replacement, simil...