Closet, closet, closet

We were set to buy a closet system from an online vendor, and costs were about $4000 - but that was unfinished so we could match paint.  If they paint (their colors) it's almost $5000.  Given that most of closet will be hanging (no drawers and only one set of shelving), we priced out building it and it's under $1000.  Guess which option we chose?

Time to build. We previously shared pictures of lots of cut plywood.

First we glue edge on front of shelves - for decor and function.


Then we sand to ensure the new edge and plywood are 100% smooth - we're using this for clothes storage, don't want rough edges.


Repeat the above 5 times.  

Build some vertical spacers for the shelves and glue them up.


Attach vertical spacers to sides of shelving with glue and small finish nails.


Unfortunately the above step needs to be repeated - we have 6 spacers on each side, and we only have enough clamps to secure two at a time.  So lots of time waiting (4 hours) for glue to dry before we repeat the above.


No comments:

Post a Comment

Garage, other side, part deux

We don't have a ton of pictures even though good progress was made.   Short story: we finished all the termite damage replacement, simil...